Product description

FEATURES

High reliability and Low maintenance. Automatic SEES Water Level Controller SEES-Sump can be used for a long time, no maintenance or repairing would be Required during its operational period. Low AC Voltage sensing circuit to avoid polarization of electrodes in water. These special stainless steel plastic SEES molded conductive electrodes are Long life sensors and do not require frequent cleaning or replacement. Overflow prevention system provides effective and reliable Water level monitoring, with Level Indicators.

Rocker Bypass Switch.

The optional rocker switch is provided to bypass system operation in case of system failure. so no need to disconnect the system when it gets failed.

DryRun

Due to faulty foot valve or air leakage in the pipe if the motor runs dry then it gets switched off automatically and gives fault indication. For more details please watch video demo.

VoltageCut-off

Automatic Water Level Controller SEES-S automatically switches-off the pump if the supply voltage drops below 160V or Crosses 250V.

 

Sutable for

mono block pump (sump motor)
sump submersible pumps.
Jet Pumps, etc...


This Water level controllers Indicator is highly recommended for metro cities or areas where drinking water is supplied through pipelines which are further distributed in homes, hotels, societies etc.

At large our systems not only help you but your neighbours and society, also as it reduces the wastage of water by cutting down any further overflow than what you need.

 

AUTOMATIC WATER LEVEL CONTROLLER(SUMP)
•When overhead tank goes 20% pump starts automatically and when tank full automatic pump will turn off
•If sump tank also empty pump will turn off
•Dry run also available, if checks a water flow for one minute if water not flowing more than a minute pump will goes off.
•Water does not waste, and we can save electricity, and our precious time.
•SS contact sensor type.
•Microcontroller based controlling Applications: Home, School, Hospital, Industries, College.

 

SPECIFICATION POWER INPUT :
•230v input
•12v-1A Transformer
•When the power on red led will glow RELAY :
•12v T relay: 250v 30A, 24v 30A
•Relay used :1 Channel SENSOR PINS:
•Common (com), Sump Low(SL), Sump High (SH), Tank Low (TL), Tank High (TH), Dry run (DR). SENSOR TYPE:
•SS Contact type

  • Model Name/Number SEES-SUMP
  • Operation Type Fully Automatic Phase 1-Phase
  • Range 3.1-5m, 0-3m
  • Features Corrosion Resistant, Low Temperature Resistant
  • Usage/Application Water Level Controller
  • Input Voltage 160V - 250V
  • Size 170mm x150mm x 60mm
  • Warranty 1 Year
  • Dry run trip delay 90 seconds.
  • Power onDelay 30 seconds
  • Frequency 50 Hz

 

AUTOMATIC WATER LEVEL CONTROLLER – SUMP MODEL- 1 PH

per piece

₹3,199 ₹5,500 42% OFF

Product description

FEATURES

High reliability and Low maintenance. Automatic SEES Water Level Controller SEES-Sump can be used for a long time, no maintenance or repairing would be Required during its operational period. Low AC Voltage sensing circuit to avoid polarization of electrodes in water. These special stainless steel plastic SEES molded conductive electrodes are Long life sensors and do not require frequent cleaning or replacement. Overflow prevention system provides effective and reliable Water level monitoring, with Level Indicators.

Rocker Bypass Switch.

The optional rocker switch is provided to bypass system operation in case of system failure. so no need to disconnect the system when it gets failed.

DryRun

Due to faulty foot valve or air leakage in the pipe if the motor runs dry then it gets switched off automatically and gives fault indication. For more details please watch video demo.

VoltageCut-off

Automatic Water Level Controller SEES-S automatically switches-off the pump if the supply voltage drops below 160V or Crosses 250V.

 

Sutable for

mono block pump (sump motor)
sump submersible pumps.
Jet Pumps, etc...


This Water level controllers Indicator is highly recommended for metro cities or areas where drinking water is supplied through pipelines which are further distributed in homes, hotels, societies etc.

At large our systems not only help you but your neighbours and society, also as it reduces the wastage of water by cutting down any further overflow than what you need.

 

AUTOMATIC WATER LEVEL CONTROLLER(SUMP)
•When overhead tank goes 20% pump starts automatically and when tank full automatic pump will turn off
•If sump tank also empty pump will turn off
•Dry run also available, if checks a water flow for one minute if water not flowing more than a minute pump will goes off.
•Water does not waste, and we can save electricity, and our precious time.
•SS contact sensor type.
•Microcontroller based controlling Applications: Home, School, Hospital, Industries, College.

 

SPECIFICATION POWER INPUT :
•230v input
•12v-1A Transformer
•When the power on red led will glow RELAY :
•12v T relay: 250v 30A, 24v 30A
•Relay used :1 Channel SENSOR PINS:
•Common (com), Sump Low(SL), Sump High (SH), Tank Low (TL), Tank High (TH), Dry run (DR). SENSOR TYPE:
•SS Contact type

  • Model Name/Number SEES-SUMP
  • Operation Type Fully Automatic Phase 1-Phase
  • Range 3.1-5m, 0-3m
  • Features Corrosion Resistant, Low Temperature Resistant
  • Usage/Application Water Level Controller
  • Input Voltage 160V - 250V
  • Size 170mm x150mm x 60mm
  • Warranty 1 Year
  • Dry run trip delay 90 seconds.
  • Power onDelay 30 seconds
  • Frequency 50 Hz

 

badge
badge
badge

You might like these